Full shelf of Agilent N2X 4-slot chassis’s and cards now available!

We have a good sized stock of the Agilent (Now Ixia) N2X platform components in stock. The Agilent N2X Platform provides cost-effective multi-port test systems for verifying the maximum performance of networks and devices. It not only can verify service attributes of entire networks end-to-end, but also can isolate problems down to individual networking devices and subsystems. Typical configurations run between $9,995.00 to $16,995.00 so don’t hesitate to contact me concerning pricing. Each of these units has been fully tested upon arrival and will be completely retested at shipping time.

Agilent P/N: N5541

Optional Components:
1735A
N5553B
E7317B

All our products come with a 90 days hardware warranty, along with Free Fedex Overnight shipping. We accept Government PO’s and do ship internationally! If you are interested in purchasing any of our N2X’s feel free to contact me via any of the following means:

Kurt Paulus
NW Remarketing Inc
360 Belmont St NE
Salem, OR  97301
503.391.8191 x114
503.881.3578 Direct
503.375.8470 fax
AOLIM- kurtnwr
kurt@nwrusa.com

If you are looking for any other pieces of telecom and networking hardware, contact our company at:
Northwest Remarketing
360 Belmont St NE
Salem, OR 97301
503.391.8191 ext 113
503.931.6636 Cell
503.375.8470 Fax
nwrusa.com

Spirent Testcenter SPT-9000A 2x XFP-1001A 10G XFP

Hi! Kurt here from Northwest Remarketing featuring the Spirent Testcenter SPT-9000A 2x XFP-1001A 

If you have any questions about this equipment please feel free to call me @ 877.650.4041 . I am available to answer your questions 8-5 (pacific time zone).

US $18,995.00

 

kurt@nwrusa.com <Contact Me

This unit is in great shape and comes to you with a 90 day hardware warranty. This unit powers right up and is ready to go.    US $18,995.00

1 x Spirent TestCenter SPT-9000A

2x Spirent ACC-2090B – SFF Card Carrier/Adapter for SPT-2000A/SPT-9000A

2x Spirent XFP-1001A – 10GbE XFP, 1 Port (SFF)       For more information please click here

SPT-9000A Technical Specifications                    

- Spirent TestCenter 9U chassis with 12 test module capacity    nwrusa.com<- Our Website

- Supports up to 96 10/100/1000 Mbps Ethernet ports, 96 Gigabit Ethernet ports, 144 dual media Gigabit Ethernet ports, 24 10GbE ports, 24 UniPHY ports, 24 WAN ports or a combination of these port types

- Built-in module locking security mechanism to prevent unwanted removal of modules

- Vertical module slot orientation

- Power: 100-240 VAC. Nominal 115 or 230 VAC, 50-60 Hz. The SPT-9000A chassis comes standard with two 1200-Watt power supplies, each requiring its own 15 AMP circuit

2 power supplies – Inlet AC requirement 2 115V @15A (3450W AC nominal) circuits, output DC power of power supply is 1200W per power supply or 2400W total

3 power supplies – Inlet AC requirement 3 120V/15A (5175W AC nominal) circuits, output DC power of power supply is 1200W per power supply or 2400W total. Note: Three power supplies required for 14 or more UniPHY or WAN ports.

For Sales, Quotes and assistance:

Kurt Paulus

NW Remarketing

503-391-8191 x114

503-881-3578 Direct

503-375-8470fax

AOLIM: kurtnwr

kurt@nwrusa.com

- BTU Requirements:

2 power supplies – 10,000 BTU/h

3 power supplies – 15,000 BTU/h (assume 80% heat load for air conditioning)

- Redundant power supply option: hot swappable third power supply. Note: Power redundancy is module configuration dependent.

- Removable fan tray for easy maintenance

- Dimensions: 17”W x 15.75”H x 20”D (48.3W x 21.6H x 50.165D cm)

- Weight: 110 lbs. (49.8 kg) fully loaded.

- Shipping weight approx. 130 lbs. (59 kg)

- Operating environment: 59° to 104° F (15° to 35° C); 20 to 80% relative humidity. Must have 6-inch space for unimpeded airflow into the chassis fans, and out of the chassis vents. Must also have blank panels installed for all empty slots.

- Front panel LCD: Scrolls and displays chassis currently configured IP Address, Gateway, Netmask, temperature and other information for easy verification of chassis configuration and error messages

- Front panel LEDs: power, fan, link, status and over temperature

- Back panel LEDs: activity/collision, link/error, 10/100Mbps, 1000Mbps

- Ethernet connection: Two 10Base-T connectors (one on the front and one on the back, only one can be active)10/100/1000 Mbps (half/full duplex in 10/100 mode)

- Connectors: Two DB9 serial console (one on the front and one on the back, only one can be active); RJ-45 Expansion In/Out connectors for multiple chassis connection; RJ-45 BITS clock connector; connectors to attach to an external GPS or CDMA receiver

For more information please click here

NOTE: NO SOFTWARE OF ANY KIND (EXTERNAL OR INTERNAL) IS PROVIDED WITH THE HARDWARE. PLEASE CONTACT SPIRENT TO OBTAIN SOFTWARE LICENSE RIGHTS AND MAINTENANCE SUPPORT.

Kurt Paulus

NW Remarketing

503-391-8191 x114

503-881-3578 Direct

503-375-8470fax

AOLIM: kurtnwr

kurt@nwrusa.com

Spirent Testcenter SPT-9000A 2x XFP-1001A 10G XFP.